Mixing Overview
Creating all of your favorite flavor profiles is a complex craft, but learning how to use terpenes is easier than you think. All it really takes is some basic math and a steady hand.
It can be a little overwhelming at first, but we’ve broken it down to a science (literally) so you can safely and efficiently use terpenes for distillates with confidence. We promise it’s as easy as putting together your favorite recipe. All of our terpene flavors are compatible with one another, so you’ll be able to experiment safely!
Before you start
Before getting started, ensure you have all the proper equipment. You know we’re big on the clean part, so make sure it’s sanitized and ready to go. Same goes for you — wash your hands and set up in a clean environment.
Know your conversions. Getting your measurements right could be the difference between creating an amazing, mind-blowing product, or taking one whiff of it and finding out you’ve gone too far. Remember that a little goes a long way. Our products are incredibly pure, highly concentrated, and super potent. Keep in mind how powerful our terpenes for distillate are. Using them without diluting to safe levels will lead to an overwhelming experience. Use them with caution, start slow, and work your way up steadily.
Get creative! You’re probably wondering what kind of products you can use them with. The answer is just about anything — topicals, food, vape cartridges, edibles, concentrates, tinctures, flower, fragrances, beer — there truly are no limits to how you can use terpenes. People are finding new ways to infuse terps in products every day. You’re only limited to the bounds of your imagination!
MIXING RATIOS & SUGGESTED USE
Flower
Starting Point: 1% by weight
Example: 1g of product, add 0.01g (approximately 1 drop with our provided glass dropper)
Instructions for SPRAY: Spray buds lightly and evenly using a pump misty sprayer that does not fully saturate the flower and gently toss in an enclosed container to cure. (Always use glass or an approved HDPE plastic sprayer to avoid undesirable reactions.)
Instructions for INFUSION (recommended):
dsfhlksdjhflksdjf
Vapes
With Liquify Pro/ TEC:
Starting Point: 1% by volume and work up from there. Recommended at 5%.
Example: 9g Distillate / Clear + 0.5g terpenes / flavors + 0.5g Liquify Pro / TEC
Without Liquify Pro:
Starting Point: 1% volume and work up from there. Recommended at 5%.
Example: 9.5g Distillate / Clear + 0.5g Terpenes / Flavors
For D8 / D9 / CBD:
D8: Start with 6% terpenes/flavors and 5% Liquify TEC / Pro
D9: Start with 6% terpenes/flavors
CBD: Start with 6% terpenes/flavors and 39% Liquify TEC / Pro
Concentrates
Starting Point: 1% by weight
Example: 2g of product, add 0.02g (approximately 1-2 drops with our provided dropper)
Pre Rolls
Starting point: 3% by weight - 10/90 terpene to ethanol ratio. Terpenes should be blended with ethanol (5-10% terpenes to ethanol blend)
Isolates
Starting point: 2% of terpenes/flavors + 43% Liquify TEC/PRO.
Recommended:
6% + 39% Liquify TEC/PRO.
Edibles
Starting point: Depending on the edible, start with 0.5% by weight and adjust accordingly.
Example: Hard candy batch weighing 14 grams, add 0.07 grams of terpenes.
Tinctures
MCT OIL BASE
For Flavor:
Add 0.5-1% by volume
For Function/Effect-Based:
Add 1-2% by volume
High Potency/Specialized Blends:
Add 2-5% volume (use CAUTION, higher levels can taste harsh or irritate the throat)
Beverages
Starting point: 4 drops per Liter
Example: 1 bottle of champagne, add 1-2 drops of your favorite flavor
Topicals
Starting point: 1% terpenes by weight.
Example: 1 ounce of lotion (28 grams), add 0.28 grams of terpenes
Terpene Blends
CDT + BDT (Dominate):
20-25% BDT
CDT (Dominate) + BDT:
40-60% CDT
CDT (Full Spectrum):
90% CDT
Enhancers
Starting point: Use 0.2% and work up from there
Recommended: 0.4% of enhancers to terpenes/flavors ratio
Other Products
Looking to find your perfect mix? Reach out to us here!
How to Use Liquify Pro & Liquify Tec
Just bought Liquify Pro or Liquify TEC? Here's how to use them.
Liquify Pro Mixing Ratio & Suggested Use
To effectively use Liquify Pro, blend using 5% of Liquify Pro to terpenes/flavors ratio
Liquify Tec Mixing Ratio & Suggested Use
To effectively use Liquify TEC, blend using 5% of Liquify TEC to terpenes/flavors ratio
MIXING FAQ
Here are some commonly asked questions when it comes to mixing your terpenes!
Can I add terpenes to my distillate?
Yes! This is one of the most popular uses for terpenes. We recomend starting at 5% and working your way up. Our sweet spot is 7%, but its best to run small test batches to find a percentage that works best for you.
Do I need to use Liquify Pro in my formulation?
You only need Liquify Pro if you need to dilute the viscosity of your distallite. Liquify Pro does not add any flavor.
How much Enhancer do I need to add to my flavor?
Our Enhancers are very potent and you only need very little. We recommend starting at 1%. and working your way. You can always add more.
What is the flash point for my terpenes?
The flash point for our terpenes is between 160-180 degrees Fahrenheit. The terpenes will evaporate if they surpass this temperature range.
What is the Shelf Life of my terpene products?
Shelf Life is 24 months from date of purchase.
Recommended Mixes to Try
Here are some of our recommended flavor mixes to try!
Watermelon Zkittles
90% Z + 10% Watermelon Wonder
Watermelon Lemonade
30% Watermelon Wonder + 40% Lemon Squeeze + 30% Runtz Candy
Blueberry Waffles
30% Blueberry Blastoff + 70% Glazed Donut
Raspberry OG
90% OG Kush + 10% Raspberry Razzle
Pink Runtz
50% Pink Panties + 50% Runtz
Melon Dew
30% Cantaloupe Craze + 70% Tropical Blast
Apple Fritter
50% Sunset Sherbet + 45% Apple Jack + 5% Cosmic Crisp
Sour Apple Pie
30% Sour Apple Jolly + 50% Pie Crust + 10% Cosmic Crisp + 10% Cinnamon Toast
Strawberry Banana
40% Strawberry Jelly + 60% Banana Bonanza
Passion Orange Guava
30% Passionfruit Party + 40% Orange Oasis + 30% Guava Galaxy
Watermelon OG
90% OG Kush + 10% Watermelon Wonder
Confused about a step? Need help mixing something not listed?
Drop us a line and we'll help you come up with your own mixing solution for your products!